stsontage logo

TU Delft

Previous Next Project scope The Cloud of Fame is a work of art that hangs at the entrance of the Technical University of the Faculty of TPM, Technical Policy Management, in Delft. STS supplied a pilewind winch for maintenance and inspection as well as interim adjustments to the artwork

CHURCH ST. JOZEF

Previous Next Project scope for this church a pilewind is used to lower the projection screen OPERATE Remote MOVE Preset Lier

MUSEUM LEIDEN

Previous Next Project scope The archaeological museum in Leiden needed a simple winch to screen the film in the temple hall. This is a pilewind STS-2 steel winch with cables and a capacity of 100 kilograms. It was installed on of control via the projector. The screen swings between two positions, but on operating a … Read more

MUSEUM 33 HOISTS

Previous Next Project scope 33 BGVD8+ chainhoists connected to 7 distribution points were supplied to a museum in the middle east. The hoists can be operated via the Piccolo or locally on one of the distribution cabinets. Loadcells were used for overload protection. OPERATE Piccolo CONTROL Combinatie MOVE Kettingtakel

Museum Grevin

Previous Next Project scope Compagnie des Alpes. since 2006 worldwide active in amusement parks, opens in 2014 a new wax museum: Musee Grevin Praag. STS has supplied for one of the sceneries the hoist installation. http://www.praha.eu/jnp/en/entertainment/museums_and_galleries/famous_grevin_museum_opens_its_branch_in.html  OPERATE Remote CONTROL Servo MOVE Preset Lier

Grafisch Lyceum Rotterdam

Previous Next Project scope The graphic lyceum Rotterdam has a practical classroom for the subject lighting. Since these are lighting trusses that do not need to be changed, manually operated slow shaft winches are sufficient. Three sets of five winches were installed for this purpose. A selector button control with yellow box was chosen as … Read more

Design bureau Heldergroen

Previous Next Project scope Bright Green is a green and creative design agency for socially responsible companies. The new office in Haarlem wanted the desks in an alcove by the ceiling which could be hoisted. This is so that exhibitions in the flooring area could be presented. In this way the computers on the tables … Read more

Codarts

Previous Next Project scope in 2013 STS installed the grid for this Circus school http://www.codarts.nl/ CONSTRUCTION Rollenzolder/ grid

Veka

Project scope Veka OPERATE Composer CONTROL Server Servo MOVE Lier Tandriem/ ketting INSTALLATIONS Show (vloer/ lieren/automatisering)